Association between occlusal features and masticatory function in Hong Kong preschool children: a survey with one-year longitudinal follow-up.

BACKGROUND: Mastication is important for breaking down food, aiding swallowing and nutrients absorption, and is therefore fundamental to a child's development. Studies have shown poor masticatory function to be associated with younger age and presence of caries. However, studies of the association between masticatory function and malocclusion yielded contradictory results. The aim of this study is therefore to investigate the association between three-dimensional occlusal features with masticatory function, among preschool children in Hong Kong. METHODS: Self-administered questionnaires on masticatory function in three domains, namely general chewing difficulty, requiring help when eating different food types and increased preference for soft food were completed by parents. Information on non-nutritive sucking habits and basic demographics were also collected in the questionnaire. Clinical examinations were conducted to record three-dimensional occlusal features and presence of caries. Baseline investigations and one-year follow-ups were undertaken for 1,566 and 996 preschool children. Association of poor masticatory function with occlusal features, sucking habits and caries was investigated using chi-squared tests. Binomial logistic regressions were then carried out incorporating any significant factors identified. Longitudinal analysis of the one-year follow-up data was carried out to investigate whether improved occlusal features, sucking habits and caries resulted in better masticatory function. RESULTS: In the cross-sectional study, the first domain of general chewing difficulty was associated with caries and thumb/digit sucking. The second domain of requiring help when eating different food types was associated with the male sex, younger age, caries and pacifier use. The last domain of increased preference for soft foods was associated with caries and thumb/digit sucking. Occlusal features, including abnormal overjet and unilateral permanent molars not in contact, were significantly associated with poor masticatory function in the bivariate analyses, but were not significant in the logistic regressions. In the longitudinal analysis, general chewing difficulty was found to improve in those of older age and those with resolved anterior crossbite. Less help was required to eat meat in those with fewer caries. Similarly, less help was required to eat food containing bones in those with reduced pacifier use. Preferences for eating soft foods was reduced in those who developed a normal overjet. CONCLUSIONS: The study identified significant relationships between masticatory difficulties and factors associated with age, gender, active caries, and non-nutritive oral habits such as thumb/digit sucking and pacifier use. Younger children and males required more assistance with certain food types. Active caries and thumb/digit sucking habits contributed to general masticatory difficulties and preference for soft foods. The one-year follow-up indicated that improvement in masticatory function varies across age cohorts and were associated with improved occlusal features, such as resolution of anterior crossbite and normalized overjet, reduced pacifier use, and a decrease in the number of decayed teeth.

Characteristics and outcome of a territory-wide cohort study of patients with acquired hemophilia A in Hong Kong.

INTRODUCTION: Acquired hemophilia A (AHA) is a rare bleeding disorder with destruction of factor VIII by autoantibodies. Comprehensive data for Chinese patients are lacking. Predictors of hospital stay have not been investigated. METHODS: A territory-wide review of patients diagnosed with AHA from January 1, 2012, to December 31, 2021 was performed by retrieving patients' information from an electronic database system in Hong Kong. RESULTS: Overall, 165 patients were included in this 10-year study, and the estimated incidence was 2.4 per million/year, which was higher than those reported from Caucasian cohorts. The median age of diagnosis was 80 years old. Patients had a long hospital stay (median: 25 days) and high mortality (55.2 %). The majority of deaths were caused by immunosuppression-related sepsis (49.5 %). Age was an independent predictor of overall survival (Hazard ratio: 1.065, 95 % CI: 1.037-1.093, p < 0.001), complete remission (CR) status (odd ratios (OR): 0.948, 95 % CI: 0.921-0.976, p < 0.001) and time to achieve CR (OR: 1.043, 95 % CI: 1.019-1.067, p < 0.001). Higher hemoglobin level on presentation was associated with shorter time to achieve CR (OR: 0.888, 95 % CI: 0.795-0.993, p = 0.037). Factor VIII level < 1 % normal, high inhibitor titer and intensive immunosuppressive regimen predicted long hospital stay. CONCLUSION: We presented comprehensive data of Chinese patients with AHA which comprised predominantly frail elderly who required long hospital stay and had high sepsis-related mortality. This posed challenges in managing AHA in such patients. Individualized immunosuppressive therapy is needed to balance the benefits and risk of septic complications.

Single-nucleus multiomic mapping of m6A methylomes and transcriptomes in native populations of cells with sn-m6A-CT.

N6-methyladenosine (m6A) RNA modification plays important roles in the governance of gene expression and is temporally regulated in different cell states. In contrast to global m6A profiling in bulk sequencing, single-cell technologies for analyzing m6A heterogeneity are not extensively established. Here, we developed single-nucleus m6A-CUT&Tag (sn-m6A-CT) for simultaneous profiling of m6A methylomes and transcriptomes within a single nucleus using mouse embryonic stem cells (mESCs). m6A-CT is capable of enriching m6A-marked RNA molecules in situ, without isolating RNAs from cells. We adapted m6A-CT to the droplet-based single-cell omics platform and demonstrated high-throughput performance in analyzing nuclei isolated from thousands of cells from various cell types. We show that sn-m6A-CT profiling is sufficient to determine cell identity and allows the generation of cell-type-specific m6A methylome landscapes from heterogeneous populations. These indicate that sn-m6A-CT provides additional dimensions to multimodal datasets and insights into epitranscriptomic landscape in defining cell fate identity and states.

Absence of TRIC-B from type XIV Osteogenesis Imperfecta osteoblasts alters cell adhesion and mitochondrial function - A multi-omics study.

Osteogenesis Imperfecta (OI) is a heritable collagen-related bone dysplasia characterized by bone fractures, growth deficiency and skeletal deformity. Type XIV OI is a recessive OI form caused by null mutations in TMEM38B, which encodes the ER membrane intracellular cation channel TRIC-B. Previously, we showed that absence of TMEM38B alters calcium flux in the ER of OI patient osteoblasts and fibroblasts, which further disrupts collagen synthesis and secretion. How the absence of TMEM38B affects osteoblast function is still poorly understood. Here we further investigated the role of TMEM38B in human osteoblast differentiation and mineralization. TMEM38B-null osteoblasts showed altered expression of osteoblast marker genes and decreased mineralization. RNA-Seq analysis revealed that cell-cell adhesion was one of the most downregulated pathways in TMEM38B-null osteoblasts, with further validation by real-time PCR and Western blot. Gap and tight junction proteins were also decreased by TRIC-B absence, both in patient osteoblasts and in calvarial osteoblasts of Tmem38b-null mice. Disrupted cell adhesion decreased mutant cell proliferation and cell cycle progression. An important novel finding was that TMEM38B-null osteoblasts had elongated mitochondria with altered fusion and fission markers, MFN2 and DRP1. In addition, TMEM38B-null osteoblasts exhibited a significant increase in superoxide production in mitochondria, further supporting mitochondrial dysfunction. Together these results emphasize the novel role of TMEM38B/TRIC-B in osteoblast differentiation, affecting cell-cell adhesion processes, gap and tight junction, proliferation, cell cycle, and mitochondrial function.

Nano-Sized Calcium Copper Titanate for the Fabrication of High Dielectric Constant Functional Ceramic-Polymer Composites.

A novel calcium copper titanate (CaCu3Ti4O12)-polyvinylidene fluoride composite (CCTO@PVDF) with Cu-deficiency was successfully prepared through the molten salt-assisted method. The morphology and structure of polymer composites uniformly incorporated with CCTO nanocrystals were characterized. At the same volume fraction, the CCTOs with Cu-deficiency displayed higher dielectric constants than those without post-treatment. A relatively high dielectric constant of 939 was obtained at 64% vol% CCTO@PVDF content, 78 times that of pure PVDF. The high dielectric constants of these composites were attributed to the homogeneous dispersion and interfacial polarization of the CCTO into the PVDF matrix. These composites also have prospective applications in high-frequency regions (106 Hz). The enhancement of the dielectric constant was predicted in several theoretical models, among which the EMT and Yamada models agreed well with the experimental results, indicating the excellent distribution in the polymer matrix.

Three-dimensional electron temperature measurement of inertial confinement fusion hotspots using x-ray emission tomography.

We present a novel approach to reconstruct three-dimensional (3D) electron temperature distributions of inertially confined fusion plasma hotspots at the National Ignition Facility. Using very limited number of two-dimensional (2D) x-ray imaging lines of sight, we perform 3D reconstructions of x-ray emission distributions from different x-ray energy channels ranging from 20 to 30 keV. 2D time-integrated x-ray images are processed using the algebraic reconstruction technique to reconstruct a 3D hotspot x-ray emission distribution that is self-consistent with the input images. 3D electron temperatures are computed using the energy channel ratios. We demonstrate the high accuracy and applicability of this method with different complex hotspot geometries in both synthetic and experimental results.

DNA sequencing based on electronic tunneling in a gold nanogap: a first-principles study.

Deoxyribonucleic acid (DNA) sequencing has found wide applications in medicine including treatment of diseases, diagnosis and genetics studies. Rapid and cost-effective DNA sequencing has been achieved by measuring the transverse electronic conductance as a single-stranded DNA is driven through a nanojunction. With the aim of improving the accuracy and sensitivity of DNA sequencing, we investigate the electron transport properties of DNA nucleobases within gold nanogaps based on first-principles quantum transport simulations. Considering the fact that the DNA bases can rotate within the nanogap during measurements, different nucleobase orientations and their corresponding residence time within the nanogap are explicitly taken into account based on their energetics. This allows us to obtain an average current that can be compared directly to experimental measurements. Our results indicate that bare gold electrodes show low distinguishability among the four DNA nucleobases while the distinguishability can be substantially enhanced with sulfur atom decorated electrodes. We further optimized the size of the nanogap by maximizing the residence time of the desired orientation.

Rational Design of Embedded CoTe2 Nanoparticles in Freestanding N-Doped Multichannel Carbon Fibers for Sodium-Ion Batteries with Ultralong Cycle Lifespan.

Although sodium-ion batteries (SIBs) have high potential for applications in large-scale energy storage, their limited cycle life and unsatisfactory energy density hinder their commercial applications. Here, a superior stable CoTe2/carbon anode, in which CoTe2 nanoparticles are embedded in freestanding N-doped multichannel carbon fiber (CoTe2@NMCNFs), with ultralong cycle life for SIBs, is reported. Specifically, CoTe2 nanoparticles are uniformly dispersed in the carbon matrix to inhibit its volume expansion and agglomeration during the desodiation/sodiation process, enabling a high-capacity and stable energy storage (retains 204.3 mAh g-1/612.9 mAh cm-3 at 1 A g-1 after 2000 cycles with an ultralow capacity decay of 0.016% per cycle). Moreover, a CoTe2@NMCNFs electrode exhibits a pseudocapacitive-dominated behavior, enabling the high-rate performance (152.4 mAh g-1/457.2 mAh cm-3 at 10 A g-1). The battery-capacitive dual-model reaction mechanism and outstanding reversibility of the CoTe2@NMCNFs composite are systematically investigated by ex situ XRD/SEM/TEM and a galvanostatic intermittent titration technique test, as well as surface capacitance calculations. More importantly, the fabricated sodium-ion CoTe2@NMCNFs//P2-NaNMMT-4 full cell delivers a stable reversible capacity of 445 Wh kg-1anode at 0.2 A g-1 and an excellent rate performance. The facile synthetic approach together with unique nanostructural design, provides a meaningful reference for the rational design of next-generation ultralong cycle-life SIBs anodes.

Comprehensive Effects of Photobiomodulation Therapy as an Adjunct to Post-orthodontic Treatment Care: A Systematic Review.

PURPOSE: To evaluate the comprehensive effects of photobiomodulation (PBM) therapy on teeth after active orthodontic treatment. MATERIALS AND METHODS: This systematic review was conducted according to the PRISMA guidelines. Six databases were electronically searched and screened for eligible human and animal studies published up to August 2020. The risk of bias was assessed based on the Cochrane Handbook for Systematic Reviews of Interventions and Systematic Review Centre for Laboratory Experiment Tool. Two independent reviewers performed all procedures in duplicate. Any disagreement was resolved by discussion or consultation with a third reviewer. RESULTS: A total of 395 records were identified from the initial search up to August 2020. Following screening, 16 full-text articles were reviewed for eligibility (κ > 0.90), and ultimately 9 studies (3 clinical studies and 6 animal studies) were included in this review. The key outcomes observed were 'tooth position maintenance' and 'root resorption rehabilitation'. Two controlled clinical trials and two animal studies supported the preventive effects of PBM therapy on the relapse of post-orthodontic tooth positions, while the other two animal studies reported opposing findings. Regarding root resorption, all evidence supported the rehabilitation potential using PBM therapy for teeth that had undergone orthodontic tooth movement. There was a high risk of bias among studies, except for one randomised controlled trial. Due to the substantial heterogeneity among studies in terms of their types, participants, designs, PBM therapy settings and variables of interest, it was not possible to conduct a meta-analysis; therefore, a qualitative synthesis is presented. CONCLUSION: The quality of evidence for PBM therapy contributing to the maintenance of tooth position or improved dental health after orthodontic treatment remains low. There is considerable controversy over the effects of PBM therapy on orthodontic relapse. However, the use of PBM therapy after orthodontic treatment has promising effects for root resorption rehabilitation and is generally recommended.

Physical stability and in vivo brain delivery of polymeric ibuprofen nanoparticles fabricated by flash nanoprecipitation.

Ibuprofen (IBP), a common non-steroidal anti-inflammatory drug (NSAID) with a log P of 3.51, has been shown to possess potential benefit in the treatment of Alzheimer's disease. However, the bioavailability of IBP to the brain is poor, which can be linked to its extensive binding to plasma proteins in the blood. This study aimed to evaluate the nanoparticle production of IBP by flash nanoprecipitation (FNP) technology, and to determine whether the nanoparticles prepared by FNP could enhance the delivery of IBP into the brain. Polymeric IBP nanoparticles were prepared with poly(ethylene glycol)-poly(lactic acid) (PEG-PLA) diblock copolymer as stabilizer under optimized conditions using a four-stream multi-inlet vortex mixer (MIVM). The optimized nanoparticles displayed a mean particle size of around 50 nm, polydispersity index of around 0.2, drug loading of up to 30% and physical stability of up to 34 days. In-depth surface characterization using zeta potential measurement, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) showed that the surfaces of these nanoparticles were covered with the hydrophilic PEG groups from the diblock copolymer. In vivo brain uptake study of the IBP nanoparticles indicated that the particles, when coated with polysorbate 80, displayed an enhanced brain uptake. However, the extent of brain uptake enhancement appeared limited, possibly due to a rapid release of IBP from the nanoparticles into the blood stream following intravenous administration.

Low-level laser-aided orthodontic treatment of periodontally compromised patients: a randomised controlled trial.

Low-level laser irradiation (LLLI) shows effects in orthodontic pain relief and periodontal inflammation control. The aim of this article is to investigate the analgesic and inflammation-modulatory effects of low-level laser irradiation among orthodontic patients with compromised periodontium. A randomised controlled trial with split-mouth design was conducted in 27 adults with treated and controlled chronic periodontitis over 6 months. One side of the dental arch underwent repeated treatment under a 940-nm diode laser (EZlase; Biolase Technology Inc.) with a beam size of 2.8 cm2 for 60 seconds at 8.6 J/cm2, whilst the other side received pseudo-laser treatment. Laser irradiation was applied repeatedly for 8 times during the first 6 weeks after bracket bonding and monthly thereafter until the end of orthodontic treatment. Subjective pain (assessed by visual analogue scale in pain diary and by chairside archwire activation), periodontal status (assessed by periodontal clinical parameters), cytokines in gingival crevicular fluid (interleukin 1ß, prostaglandin E2, substance P) and periodontopathic bacteria (Porphyromonas gingivalis and Treponema denticola) in supragingival plaque were assessed. The intensity of pain was lower on the laser-irradiated side at multiple follow-up visits (P < 0.05). The pain subsided 1 day earlier on the laser side, with a lower peak value during the first week after initial archwire placement (P < 0.05). The laser side exhibited a smaller reduction in bite force during the first month (mean difference = 3.17, 95% CI: 2.36-3.98, P < 0.05 at 1-week interval; mean difference = 3.09, 95% CI: 1.87-4.32, P < 0.05 at 1-month interval). A smaller increase was observed in the plaque index scores on the laser side at 1-month (mean difference = 0.19, 95% CI: 0.13-0.24, P < 0.05) and in the gingival index scores at the 3-month follow-up visit (mean difference = 0.18, 95% CI: 0.14-0.21, P < 0.05). Laser irradiation inhibited the elevation of interleukin-1ß, prostaglandin E2 and substance P levels during the first month (P < 0.05). However, no intergroup difference was detected in the bacteria levels. Low-level laser irradiation exhibits benefits in pain relief and inflammation control during the early stage of adjunctive orthodontic treatment in periodontally compromised individuals.

Using three-dimensional average facial meshes to determine nasolabial soft tissue deformity in adult UCLP patients.

BACKGROUND AND PURPOSE: There is limited literature discussing the residual nasolabial deformity of adult patients prior to undergoing orthognathic surgery. The purpose of this study is to determine the site and severity of the residual nasolabial soft tissue deformity between adult unilateral cleft lip and palate (UCLP) patients and a non-cleft reference group, prior to orthognathic surgery. MATERIAL AND METHODS: Sixteen adult male UCLP patients, who all received primary lip and palate surgery according to a standardised Hong Kong protocol were recruited for this study. Facial images of each individual were captured using three-dimensional (3D) stereophotogrammetry and compared to a previous published Hong Kong non-cleft reference group of 48 male adults. Using two-sample t-tests differences in linear and angular measurements and asymmetry scores were evaluated between the two groups. In addition a "conformed" average UCLP facial template was superimposed and compared to conformed average non-cleft reference group facial template. Reproducibility of the measurements were assessed using Students paired t-tests and coefficients of reliability. MAIN FINDINGS: Significant differences in linear and angular measurements and asymmetry scores were observed between the two groups (p < 0.05). Adult UCLP patients showed significantly narrower nostril floor widths, longer columella length on the unaffected side, a wider nose, shorter cutaneous lip height, shorter upper lip length and shorter philtrum length. Prior to orthognathic surgery adult UCLP patients showed significantly more facial asymmetry. Superimposition of the average facial meshes clearly showed the site and severity of the deficiency in the x, y and z-directions. CONCLUSIONS: Many of the nasolabial characteristics reported to be present in children following primary UCLP repair continue into adulthood. The detrimental soft tissue effects of orthognathic surgery for UCLP patients may be different to non-cleft individuals; and as such the site and severity of the residual deformity should be assessed prior to surgery.

Interplay between Amphiphilic Stabilizers and Cholesterol in the Stabilization of Itraconazole Nanoparticles Prepared by Flash Nanoprecipitation.

While flash nanoprecipitation (FNP) has proven to be an extremely rapid and highly efficient nanoparticle fabrication process for hydrophobic drugs, physical instability associated with nonequilibrium molecular orientation of amphiphilic stabilizers (ASs) in nanoparticles remains a major snag in the general application of this nanotechnology, particularly for a drug with ACDLog P in the range of ∼2-9. This study was aimed at elucidating the costabilizing role of cholesterol (CLT) in the FNP of AS-stabilized nanoparticles of itraconazole (ITZ), a model drug with an ACDLog P of 4.35 ± 1.22 and log P of 5.66. The presence of CLT was shown to reduce the initial particle size and markedly improve the short-term storage stability of ITZ nanoparticles. The stability-enhancement by CLT can be linked to its higher miscibility or stronger interaction with the AS hydrophobic moiety than with ITZ (as reflected by the absolute differences of their solubility parameter values). Surface analyses employing X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) suggest that, through the coprecipitation of CLT with ITZ to form a mixed hydrophobic drug core, the CLT molecules that are exposed on the core surface serve to afford a stronger and more timely surface anchorage of the AS hydrophobic moieties, thereby facilitating the rearrangement of AS molecules toward the stable micelle-like structure. The present findings offer a mechanistic insight into the interplay between amphiphilic stabilizer and costabilizer in enhancing the physical stability of drug nanoparticles and may carry important implications for the development of more stable and efficacious nanoparticle therapeutics.

Silver-nanoparticles-loaded chitosan foam as a flexible SERS substrate for active collecting analytes from both solid surface and solution.

Here, we report a dual-use surface-enhanced Raman scattering (SERS) substrate based on a flexible three-dimensional (3D) chitosan foam, onto which silver nanoparticles (Ag NPs) are firmly immobilized through amino groups from chitosan chains. The SERS substrate can actively collect analytes either on solid surface by swabbing or in solution by adsorption. The compressible characteristic of chitosan foam enables easy removal of solvent through gentle pressing, which can achieve fast pre-concentrating of analytes before measurements. In addition, the substrate is shape adaptable and thus is suitable for sampling contaminants on solid surfaces. The SERS substrates exhibit acceptable reproducibility (16.4% in relative standard deviation). Furthermore, it detects Raman probe Nile Blue A down to 5 pg by swabbing solid surface and Rhodamine 6G down to 10 ppb by adsorbing analyte in the solution. Three pesticide samples (triazophos, methidathion, and isocarbophos) can also be detected down to µg level with the substrate. It is believed that such a versatile SERS substrate may find great opportunity in realistic sensing applications.

Five-year effectiveness of short messaging service (SMS) for pre-diabetes.

OBJECTIVE: An observational post-randomized controlled trial (RCT) design was adopted to evaluate the long-term sustainability and maintenance of improved glycemic control, lipid profile, reduced progression to diabetes at 3-year following a 2-year short messaging service (SMS). We performed a naturalistic follow-up to the 104 participants of SMS intervention, a 2-year randomized controlled trial comparing the SMS to non-SMS for pre-diabetes. All participants were arranged screening for diabetes at 5-year assessment. Primary outcome of this post-RCT study was cumulative incidence of diabetes whereas secondary outcomes were the change in biometric data over a 5-year period. RESULTS: After a mean 57-month follow-up, 19 (18.3%) were lost to follow-up after the RCT period. Progression to diabetes occurred in 20 and 16 patients among the intervention and control group respectively, with no significant between-group difference (8.06 and 7.31 cases per 100 person years, respectively; Hazard Ratio in the intervention group, 1.184; 95% confidence interval, 0.612 to 2.288; p-value = 0.616). No significant effect of SMS on reduction in diabetes was observed in overall and pre-defined subgroups. The SMS intervention preserved the clinical benefits within the trial period but failed to transform from treatment efficacy to long-term effectiveness beyond 2 years after intervention. Trail registration ClinicalTrials.gov Identifier NCT01556880, retrospectively registered on March 16, 2012.

Impact of molecular rearrangement of amphiphilic stabilizers on physical stability of itraconazole nanoparticles prepared by flash nanoprecipitation.

Flash nanoprecipitation (FNP) is a controlled antisolvent precipitation process that has proven effective for consistent production of drug nanoparticles with a defined mean particle size and narrow particle size distribution. However, physical instability of the generated nanoparticles remains a major challenge in the application of this technology in pharmaceutical formulation. Aimed at resolving this problem, the present study has investigated the FNP process and associated stabilization mechanism of itraconazole (ITZ) nanoparticles through in-depth nanoparticle characterization. Results showed that ITZ nanoparticles could be reproducibly produced with a mean particle size <100 nm and a polydispersity index <0.2 in the presence of amphiphilic stabilizers (ASs). Surface analysis of freshly formed nanoparticles by X-ray photoelectron spectroscopy (XPS) revealed initially a disordered packing structure and subsequently a time-dependent molecular rearrangement of incorporated AS towards a micelle-like structure. The faster the molecular rearrangement of AS, the more stable the nanoparticles, as monitored by the change in particle size with time. These findings may have important implications for the selection of effective ASs for formulating stable drug nanoparticles. The present study is the first of its kind to demonstrate the utility of XPS to track the molecular transport of stabilizers in rapidly generated nanoparticles.

In situ synthesis of iron sulfide embedded porous carbon hollow spheres for sodium ion batteries.

Iron sulfide embedded porous carbon hollow spheres (FeSx@CS) have been successfully synthesized through a facile and environment friendly in situ synthetic method. Using this method, a porous carbon matrix and uniformly dispersed iron sulfide nanoparticles were formed simultaneously and assembled into hollow spheres. The as-synthesized FeSx@CS material showed high reversible capacity, outstanding cycle performance, and excellent rate capability when it was applied as an anode material for sodium ion batteries. It delivered a remarkable charge capacity of 656.75 mA h g-1 in the first cycle and a capacity retention of 97% after 100 cycles. When the current density was increased from 50 mA g-1 to 1000 and 2000 mA g-1, high capacity retention of 76.3% and 62.5% was achieved, respectively.

Novel Silicon Doped Tin Oxide-Carbon Microspheres as Anode Material for Lithium Ion Batteries: The Multiple Effects Exerted by Doped Si.

Silicon doped tin oxide embedded porous carbon microspheres (Siy Sn1-y Ox @C) are synthesized. It is found that the doped Si not only improves the reversibility of lithiation/delithiation reactions, but also prevents Sn from aggregation. In addition, the doped Si introduces extra defects into the carbon matrix and produces Li+ conductive Li4 SiO4 , which accelerates Li+ diffusion. Together with the conductive, porous carbon matrix that provides void space to accommodate the volume change of Sn during charge/discharge cycling, the novel Siy Sn1-y Ox @C exhibits excellent electrochemical performance. It shows a high initial columbic efficiency of 75.9%. A charge (delithiation) capacity of 880.32 mA h g-1 is retained after 150 cycles, i.e., 91% of the initial capacity. These results indicate that the as-synthesized Siy Sn1-y Ox @C is a promising anode material for lithium ion batteries.

Ionic liquid decorated mesoporous silica nanoparticles: a new high-performance hybrid electrolyte for lithium batteries.

We report a novel hybrid electrolyte based on mesoporous silica nanoparticles decorated with an ionic liquid, which exhibits a superior lithium ion transference number of >0.8, and an excellent electrochemical window of >5 V with attractive ionic conductivity. The insights obtained pave a new way for the preparation of high-performance electrolytes with mesoporous structures.

Cost-Effectiveness of a Short Message Service Intervention to Prevent Type 2 Diabetes from Impaired Glucose Tolerance.

Aims. To investigate the costs and cost-effectiveness of a short message service (SMS) intervention to prevent the onset of type 2 diabetes mellitus (T2DM) in subjects with impaired glucose tolerance (IGT). Methods. A Markov model was developed to simulate the cost and effectiveness outcomes of the SMS intervention and usual clinical practice from the health provider's perspective. The direct programme costs and the two-year SMS intervention costs were evaluated in subjects with IGT. All costs were expressed in 2011 US dollars. The incremental cost-effectiveness ratio was calculated as cost per T2DM onset prevented, cost per life year gained, and cost per quality adjusted life year (QALY) gained. Results. Within the two-year trial period, the net intervention cost of the SMS group was $42.03 per subject. The SMS intervention managed to reduce 5.05% onset of diabetes, resulting in saving $118.39 per subject over two years. In the lifetime model, the SMS intervention dominated the control by gaining an additional 0.071 QALY and saving $1020.35 per person. The SMS intervention remained dominant in all sensitivity analyses. Conclusions. The SMS intervention for IGT subjects had the superiority of lower monetary cost and a considerable improvement in preventing or delaying the T2DM onset. This trial is registered with ClinicalTrials.gov NCT01556880.